Cool Line Hydraulic Oil Cooler

All hydraulic oil coolers work by transferring heat from the oil to the atmosphere. As oil travels through the tubes, the heat is transferred to the fins. Air passing over the fins then transfers this heat to the sky. Heat transfer cannot occur without proper air flow. OC Series Oil Cooler only.

Hydraulic Motor. Cool line HR series Oil Coolers are easy to clean & robust. The Cooler is built from aluminium, therefore maximizing heat transfer. More Info ›.

May 06, 2021 Heavy Duty Aluminum Bar and Plate Hydraulic Oil Cooler Applications Mobile and Industrial Hydraulics Our Part Number 24096 Core (Finned area) Dimensions 13.78” x 10” x 1.77” Inlet -12 SAE O-Ring Seal (3/4-16 UNF-2B) Outlet -12 SAE O-Ring Seal (3/4-16 UNF-2B) Overall Dimensions 20.43” x 11” x 1.77” Replaces Cool Line C-14, 4UJD4 Max ...

Tech details: Forced air oil cooler, hydraulic motor, coolant flow range 4 to 50 gpm, coolant hp heat removed 55, coolant max pressure 377 psi, coolant port size sae #20, hydraulic motor gpm 4.2, oil port size #12 sae, min oil pressure 500 psi, max oil pressure 3500 psi, hydraulic motor displacement 0.500 cu in/rev, motor type gear, max temp 250, aluminum heat exchanger ma, terial, black ...

An hydraulic oil cooler is a device designed to prevent oil used in hydraulic systems from overheating. This is a critical function in hydraulic systems, as overheating of the oil can lead to a drop in system efficiency and excessive wear of the system components in general due to reduced oil viscosity. In most cases, the coolers allow the oil ...

HydraFlow SL Series: 25 GPM, 3000 psi Hydraulic Oil Cooler. Narrow profile unit at 8-1/4 wide the SL can be mounted in tight installations. Corrosion resistant 304 stainless steel construction. Top mounted filter for fast filter changes. 3/4 high pressure and 1 low pressure connections.

Aftermarket AR61885 Tractor A/c Condenser & Oil Cooler Fits John Deere 4230 4430 4630 4040. $289.98 New. 87014828 Skid Steer Loader Hydraulic Oil Cooler Fits Ford Holland. $336.99 New. John Deere Hydraulic Oil Cooler Oe# AM105321.

ST Oil Coolers. OMT air/oil heat exchangers have been designed to be used on the return line of the hydraulic systems. The special structure of the cooler element in aluminium increases the conductivity quality, and the brase welding process of the conduits allows a high thermic exchange and a good resistance to pressure, obtained by using ...

View Full Product Line . Established in 1980, ASA Hydraulik is a manufacturer and producer of superior Oil Coolers, Air Coolers, Plate Coolers, Air Cooled Heat Exchangers, Hydraulic Couplings, Butterfly Valves, Butterfly Flanges, Air Charged Coolers, Hydraulic Oil Coolers, Heat Exchangers and accessories for hydraulic purposes. ASA Hydraulik is ...

Oil coolers can be selected from our standard range which can be seen in our brochure, or our engineers can design the perfect oil cooler for your application from operational data such as inlet temperatures and flow rates. Features of Thermex Hydraulic Oil Coolers include; A choice of Copper or 90/10 Cupro-Nickel Tubes. Naval brass tube plates.

The hydraulic system contains close loops only. Cooler is in a drain line where estimated flow is approx. 42 GPM. The highest expected entering oil temperature in drain line: 80 C = 176 F. The cooler has to be electrically driven, 24VDC. Step 1. Calculation of the heat needs to be rejected.

Hydraulic Oil Coolers,Hydraulic Reservoirs & Oil Coolers,Hydraulics, 10-80 GPM TTP Thermal Transfer DH-447-2-1 Oil Cooler Brand new THERMAL

HydroCool™ oil coolers are perfect for any hydraulic elevator with high usage. Some hydraulic applications in which the HydroCool™ is recommended are a twin-jack holeless with two- or three-stage telescopic jacks, heavily used single-stage twin jack holeless, and roped hydraulic applications with moderate use and travel exceeding 25 feet.

AKG hydraulic oil cooler cool LINE DCS20 24 AD product information AKG cool LINE is a standard LINE of products from the market leader in high performance industrial aluminium cooling systems. AKG is best known for its world wide presence, German engineering and convincingly reliable product quality on the one hand and competitive prices on the ...

Hydraulic Oil Coolers FluidEX Range. ... advisable to mount the cooler ‘off-line’ with its own recirculating pump. A check valve to by-pass oil across the cooler under cold starting conditions is recommended especially for oil with a high viscosity. Installation Design

AKG Cool-Line A Series Oil-To-Air Coolers Can be universally used in hydraulic, transmission, engine or lubricating oil and coolant circuits. Max operating pressure 377 PSI, max working temperature 250 degrees F. Contact us for additional options including: Internal bypass relief in 25, 30, 60 or 65 PSI settings and 575 volt motors and SAE to ...